RM32.00 - RM85.00
PENTENS T-200 UV Resistant Elastomeric Waterproofing Coating T200 / Repair Slab Bumbung Atap Bocor Kalis Air
Price RM32.00 - RM85.00
Product SKU T200
Brand Pentens
Size (L x W x H) 15 cm x 15 cm x 20 cm
Availability In Stock
Size / Color
Quantity
Description
Highlight

ADVANTAGES

  • -Water based, environment friendly
  • -Gas and oil resistant
  • -UV Blockers
  • -No blistering, cracking and peeling
  • -Chemical resistant and waterproof
  • -User friendly, suitable use on any surface
  • -Can withstand foot traffic
  • -Non-toxic

Product Description
PENTENS T-200 UV Resistant Elastomeric Waterproofing Coating

PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering hardness and durability. It resists aging from heat, sunlight, and ozone. It has excellent gas impermeability and toughness and remains flexible at low temperatures. It is a warranted roofing and tanking product.

USES
PENTENS T-200, which is a one-part elastomeric cross-linking latex copolymer emulsion designed as exposed waterproofing coating on:
-RC gutters and planter boxes
-Floor slabs
-Deck
-Wood siding/Fences
-External wall
-Flat roof
-Metal roof
-Concrete structures
APPLICATION

Surface Preparation
The surface must be sound, dry, and clean (free of dirt, gravel, pollution, mildew, and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.

Application :
PENTENS FLESEAL T-200 is suggested to apply 2 coats. Apply the first coat of PENTENS FLESEAL T-200 on the application surface. Leave to cure for approximately 2 hours before applying the second coat. PENTENS FLESEAL T-200 can be installed with conventional airless spray equipment, brush, or roller.
Coverage: On concrete roofs - 1kg/m2/2 layer, On facade/vertical - 1kg/m2/2 layer
Coverage (1.5kg) = ~16sqf)

SAFETY
Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.

https://youtu.be/Gc9aBsQUAzw