|Size (L x W x H)||15 cm x 15 cm x 20 cm|
- Good workability and sanding property
- Ideal for jointing and skimming
- Good compatibility and adhesion with wide range of Nippon Paint interior paints
- Low shrinkage
- Good open time
- Low odour and low VOC
- Complies to ASTM C475
EASYSKIM 5000 ALL PURPOSE JOINT COMPOUND
EasySKIM 5000 All Purpose Joint Compound is a ready-to-use skim coat material to smoothen uneven plastering wall, painted surfaces, plaster ceiling joints and gypsum board joints to give a smooth and seamless finishing before apply coating. EasySKIM 5000 All Purpose Joint Compound comes with a special polymer-based formulation with high-bonding power that is ideal for jointing, taping, filling and covering the interior gypsum board joints, angles, bead, trim and fastener heads.
-Good workability and sanding property.
-Ideal for jointing and skimming.
-Good compatibility and adhesion with wide range of Nippon Paint interior paints.
-Good open time.
-Low odour and low VOC.
-Complies to ASTM C475.
*Coating System (Masonry, Brick, Plastering Substrate and Fiber Board)
Joint Compound : EasySKIM 5000 All Purpose Joint Compound (No. of Coat : 2-3 coats)
Sealer / Primer : Nippon Paint Interior Wall Sealer (No. of Coat : 1 coat)
Topcoat : Nippon Paint Interior Products (No. of Coat : 2 coats)
-Application : Trowel or skimming blade
-Drying Time : (Skimming : 2-3 hours | Jointing : 4-5 hours)
-Thinning : No dilution required
-Touch Dry / Hard Dry : (Skimming : 2-3 hours | Jointing : 4-5 hours)
-Recoating Interval : (Skimming : Minimum 4 hours , Jointing : Minimum 6 hours)
-No. of Coat(s) : (Skimming : 2-3 coats | Jointing : 3 coats)
-Theoretical Coverage : (Skimming : 2.0 m² per kg per coat , Jointing : 1.8m² per kg per coat)
Welcome to Premium Hardware Store :
Trusted Malaysia Seller
Quality Control and Inspection
Great Customer Service